Contact Us Contact Ney Coventry Contact Ney Scotland Contact Ney Ireland
  Hot Air reactivation edgebander for applying preglued coil material up to 0.6mm thick to straight or profiled workpieces. 3000W Heater Blower Unit to give a rapid heat up time, which is controlled by a stepless switch to give an infinitely variable temperature for a different tape/glue combinations.

Automatic tape infeed via solenoid and easily adjustable timer to ensure the tape is always in the correct position to receive the panel with the minimum of tape wastage.
 
The Virutex EB15
View larger image
View video clip
Download printable document
Make an enquiry
 
 
 
   
Electronic
temperature control
End cutting of front
and back of the tape.
Trimming of both sides simultaneously.
 
  Flush electro magnetic front end trim guillotine, adjustable rear end trim guillotine which can be set flush or with an overlap.

Top and bottom rotary trim unit which trims flush with the edge of the panel.

The excess is removed in strips and so no dust extraction is required.
  Extendable front support rail for large panelscomplete with removable side pressure forbatch work of panels with a maximum width of 800 mm.

Possibility to edge profiled panels by removing front end trim, second pressure roller, top and bottom trim station and drive unit (if fitted). The tape is then guillotined by using the foot pedal.
 
 
EB15 Details
Input power 2850W
Min. edge width 11mm
Max. edge width 50mm
Electronic temp. control 0°-500°C
Work speed 4.2m/min
Electric supply 220V (1PH)
Weight 77Kgs
Dimensions(m) 1x0.7x1
 
 
Standard equipment:
AK97/25 Motorized trimming unit
Panel holder extention
Optional accessories:
6399082 Cantspray
Power feed unit
 
 
  © Ney Ltd, All Rights Reserved