| |
Both machines have a glue pot with a screw feed mechanism to minimise glue spillage, which applies hot melt glue directly to the edge of the panel allowing the application of unglued coil material, high pressure laminates and solid wood lippings.
The temperature set in the glue pot is maintained at the applicator roller by a frontal and top heating element. This ensures the glue is applied at the correct temperature and allows the 'wetting out' of the edge of the panel. This guarantees the maximum bond between the edging material and the board.
Electro - pneumatic tape infeed controlled by a microprocessor and timer, which automatically feeds the tape into the correct position to receive the panel with the minimum of tape wastage.
Equipped with a pre-cutting guillotine to cut all materials up to 3mm thick directly from the coil. The guillotine can be excluded for strip feeding.
Strip feed magazine for materials up to 6 mm thick, which will feed one piece at a time to eliminate feeding individual pieces by hand.
The pressure station is equipped with three pressure rollers. The first roller is of a larger diameter and is driven at the same speed as the track.
The two other rollers are non-driven and are easily removed for cleaning. Each roller is individually adjustable in pressure for maximum bond on all types of edging materials.
|
|
The whole pressure station is centrally adjustable for different thickness of edgings which gives a very quick setting time from coil to coil strip material.
The panels are transported via a drag at 10 m/min. The top pressure beam is equipped with a double row of rollers for constant pressure and is easily adjustable in height from a single handle located at the tape infeed end of the machine.
The top trimming station, corner rounding units scraper & buffer units are automatically adjusted with the beam, which gives a quick changeover for different board thickness with no separate trimming adjustment required.
The control panel is positioned on the front of the machine at the tape infeed end for easy operation and monitoring of the glue temperature and the working units.
All the working units are covered by a fully interlocked & insulated sound enclosure which also incorporates the dust extraction outlet.
There is an extending front panel support rail, which gives full support even for very large panels.
The Rapid Range from Cehisa offers many options and solutions.
Please do not hesitate to contact Ney for more information. |
