The
Virutex AG98F hand held edgebander applies
heat direct to the adhesive and
not through the material itself. Thus ensuring
the best possible application.
Suitable for use with most types of preglued
material, such as Melamine and Veneer,
the AG98F can edge circular or shaped
workpieces as well as straight edges.
Also available,
the Virutex AU93 Edge trimmer and RC21E End trimmer.
The
AG98F
The
Virutex AG98F
Hand-Held Edgebander
The
AG98E is a slight variant
on the AG98F, coming equipped with a
lap banding guide
for use on internal edges of doors, grooves
or jams.
The AG98F applies heat
direct to the adhesive using one of the two
heat settings: 300°C and 525ºC.
Pressure is applied immediately to create
the perfect bond, through a temperature resistant
roller mounted adjacent to the heater unit.
A cut off guillotine safely positioned on the upper part of the unit allows for
material to be cut from the coil (up to 50m rolls), ready for the next application.
Material up to 50mm wide and between 0.4 to 0.8mm thick can be applied, in melamine,
polyester or real wood veneer. (0.4mm PVC material cannot be applied).
AG98F
Details
Power
1,500W
Maximum
banding width
50mm
Temperature
controls (x2)
I:
300°C
II:
525°C
Air
delivery
400l/min
Weight
2.7Kgs
AG98E
Details
Power
1,500W
Maximum
banding width
40.5mm
Maximum
banding height
4.5mm
Temperature
controls (x2)
I:
300°C
II:
525°C
Air
delivery
400l/min
Weight
2.7Kgs
The
AU93 double edge cutter is designed to
trim both edges simultaneously up to
40mm wide (larger widths can be trimmed
by using each piece separately).
Long life replaceable blades make this useful tool for quick
accurate trimming.
The
AU93 Edge Trimmer
The RC21E end trimmer
is designed to complement the AU93 by allowing
pin point accuracy when trimming the excess
tag from the end of panels (0.5mm thick,
0.5mm to 54mm wide).
Reversible blades also help extend the life of the cutting
edge.