Virutex FC16I Lock Morticer

Especially designed for quick, precise morticing on doors, on-site or in the workshop. A special fixing system allows morticing on doors already hung, without damaging the surface. A fast adjustment allows multiple mortices to be made quickly.

For morticing grooved doors or those with overlap, there is an adjustment system to centre the machine. Optional bits are lowcost and easily inter-changeable, as they use the same tool-holding shaft.

The FC16I


A special fixing system allows the morticing of doors that have already been hung, without damaging the surface		The machine is able to work horizontally, especially useful if making a series of mortices, with the doors unhung		Wooden carrying box

FC16I

Details

Input power	1,100W
Max. bit Ø	30mm
Morticing depth	0-125mm
Max. morticing depth	177mm + bit Ø
Max. vise opening	190mm
No-load speed	23,000/min


Optional accessories:
1600150 CA16I Routing head 1645287 UP16I Clamp extension 1645288 UT16I Drilling accessory

Equipped from factory with hard metal lock morticer bit Ø 15mm, locking bar to make mortices on several doors at the same height, rubber protectors for delicate jobs, service keys and dust collector connection.

Optional low cost bits:
Sharing the same tool-holding shaft. Easily interchangeable. Set of 5 bits, diams: 18, 21, 23, 25, 30mm. (ref. 1640138)

Tool-holding shaft included with the FC16I
(*) Bit included with standard equipement.

1640127 Bit Ø 15mm. HM*
1640128 Bit Ø 18mm. HM
1640129 Bit Ø 21mm. HM
1640130 Bit Ø 23mm. HM
1640131 Bit Ø 25mm. HM
1640132 Bit Ø 30mm. HM

UC16K - Lock Morticing Template Holder

				For more information on the Lock Morticing Template Holder, click the link below to be taken to a dedicated page...
Designed for making frontal and lateral recesses for any kind of locks on doors and frames		Using the UC16K with the FR66F enables the user to quickly make recesses of exceptional quality